Hi folks!
Right to the point:
- Is the section on this little pen threaded or friction fit?
- Does anyone actually have a replacement bulb for these, or is it common to use the end of a sac to repair the bulb filler mechanism?
Thanks in advance.
Posted 10 March 2014 - 09:54 AM
Hi,
Recollection is the bulb is cut from conventional sac. Not sure on gripping section.
regards
david
Posted 10 March 2014 - 06:38 PM
In nearly all cases, when a pen barrel serves as the ink reservoir, the section will be threaded.
A friction seal is not secure enough when a loose section will unleash a flood.
Of course, that makes perfectly good sense, David. I was looking for the "right answer", and hadn't even though about the logic of a friction vs. threaded in this case (barrel resevoir).
I appreciate the information, guys.
Posted 08 April 2014 - 01:03 AM
I can't remember which size sac I used. It was either 12 or 10. I couldn't get the little ring back on, so I left it off, and keep it somewhere.
I have a tealy turquoisey marbled set. Which color do you have?
pens etc stolen in SF Sun 8/14/16
0 members, 0 guests, 0 anonymous users