Jump to content


Photo

Moore Safety HR Pen with Interesting Imprint.


  • Please log in to reply
4 replies to this topic

#1 david i

david i

    ADVISOR

  • ADVISORS
  • 7,515 posts
  • LocationEast Coast USA

Posted 18 September 2011 - 11:14 PM

Moore was a high quality pen maker which gave us some truly stunning early overlay/metal pens. Its safety pens were done in a wide range of sizes and in a couple-few hard rubber colors. I own a few and have had the chance to photograph some of the greats.

The following pen is mine, recently pulled from the 1000-item hoard of old pens I grabbed last summer (most being low tier, no worries). I still have not sorted the hoard, but one of the fun things is finding decent examples of early pens, including some store-brand pens.

So, I'd f gured the following Moore was just a decent (has some cap lip chipping) moderate size pen. Witth a "450" imprint ($4.50?) it is chunkier than the basic skinny models found, and is a bit more than 5" in length. It was when I peeked at the imprint that I grew more interested.

Perhaps this means little to serious Moore collectors, but for me-- a not so serious Moore collector-- this was the first seen with a "TWISTOUT" imprint.

So. I seek information. Common imprint? Interesting imprint? Any documentation known? Niche?

Here are images of the pen:

Posted Image



regards

David
David R. Isaacson MD. Website: VACUMANIA.com for quality old pens with full warranty.
Email: isaacson@frontiernet.net

Posted Image

#2 FmrLEO_GJ

FmrLEO_GJ

    journeyman

  • Members
  • 539 posts
  • LocationPenguin, NW Tasmania, AUSTRALIA

Posted 19 September 2011 - 03:37 AM

Moore was a high quality pen maker which gave us some truly stunning early overlay/metal pens. Its safety pens were done in a wide range of sizes and in a couple-few hard rubber colors. I own a few and have had the chance to photograph some of the greats.

The following pen is mine, recently pulled from the 1000-item hoard of old pens I grabbed last summer (most being low tier, no worries). I still have not sorted the hoard, but one of the fun things is finding decent examples of early pens, including some store-brand pens.

So, I'd f gured the following Moore was just a decent (has some cap lip chipping) moderate size pen. Witth a "450" imprint ($4.50?) it is chunkier than the basic skinny models found, and is a bit more than 5" in length. It was when I peeked at the imprint that I grew more interested.

Perhaps this means little to serious Moore collectors, but for me-- a not so serious Moore collector-- this was the first seen with a "TWISTOUT" imprint.

So. I seek information. Common imprint? Interesting imprint? Any documentation known? Niche?

Here are images of the pen:

Posted Image



regards

David


Hi David :)

I love safeties, but know little to nothing about Moore versions...
I 'did', however, swing by David Nishimura's site as I know he has a write-up about them, so he may be a starting point re this one, which, by the way, I think is 'funky'

It also - when capped - reads 'Stout' which is lovely as a portagaf ;)

The link to David's page: http://www.vintagepe..._safeties.shtml

Respectfully
Garth
Penguin, NW Tasmania, Australia

We will be forever known by the tracks we leave behind - Sitting Bull

#3 David Nishimura

David Nishimura

    journeyman

  • Members
  • 701 posts

Posted 19 September 2011 - 01:00 PM

If the Twistout is complete, the nib extends and retracts by turning the end -- not by pushing and pulling.

A relatively rare variant.



#4 david i

david i

    ADVISOR

  • ADVISORS
  • 7,515 posts
  • LocationEast Coast USA

Posted 20 September 2011 - 01:19 AM

If the Twistout is complete, the nib extends and retracts by turning the end -- not by pushing and pulling.

A relatively rare variant.





Thanks. Peeked at the profile at your website. This one just slides, no twist required, presumably indicated broken mechanism. Will have to ask Ron to take a peek at the guts.

regards

David
David R. Isaacson MD. Website: VACUMANIA.com for quality old pens with full warranty.
Email: isaacson@frontiernet.net

Posted Image

#5 June H

June H

    journeyman

  • Members
  • 220 posts

Posted 04 October 2011 - 06:49 AM

Thanks. Peeked at the profile at your website. This one just slides, no twist required, presumably indicated broken mechanism. Will have to ask Ron to take a peek at the guts.

regards

David


Interesting that the ends of the cap and the top end of the barrel reminds me of Waterman's HR's.

June H.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users